Polarize Film
Replacement:
Troublesome Scratches or Stains on your LCD screen?
Your LCD screen need to have Polarizer Film shield replacement.
We use a high efficiency, anti-reflection Polarizer film shield. This Polarizer
film is a film that is applied to 
the front of your screen and providesthe following advantages:Increases display
contrast and readability. Images are clearer and sharper; provides deeper looking
colors; permits a wider viewing angle in brighter environments; increases surface
transmission; protects the LCD panels from fingerprints and scratches.
We offer flat fee*
for Polarize Film Replacement, so you know what you pay for it up front.
Our average turnaround time is about 5 working days, however, it may takes longer
in some cases.
How to send in your LCD
Monitor/LCD Panel for Repair:
*Request a Repair RMA number on Web. Click
here.
*Pack the monitor with at lease a 3" air gap between the monitor and Box.
*Record a RMA number on the outside of the shipping box.
*Insure your shipment.
*Please send it to:
MoniServ, Inc.
RMA Department
1600A Noriega Street
San Francisco CA 94122
*You will be notify by e-mail when your RMA has been received.
*You will be notify by e-mail and ask for payment when the RMA has been completed.
*You can track your RMA status 24/7 on the web.
Polarizing
Film Replacement Capabilities
Polarizing
Removal Process ( Scratches on the screen)
Scratched or damaged polarizers first need to be removed from the existing glass
substrate, and the glass needs to be cleaned and prepared for the reapplication
of the new polarizing film. Both the removal and subsequent reapplication of
polarizing film need to be conducted under stringent antistatic conditions.
It is a well-known fact that during the removal process of polarizing film material
significant triboelectric charges are generated. These charges are caused when
friction is the primary means of generating static electricity. Whenever two
surfaces in close contact are separated, one surface loses electrons and becomes
positively charged while the other surface gains the same electrons and becomes
negatively charged. After separation, however, each surface retains its positive
or negative charge, unless the surface is conductive and or path to ground is
provided.
Polarizer Application
Process
Any material,
whether a conductor or non-conductor, can be charged triboelectrically. To avoid
the buildup of triboelectric charge during polarizing film application, air ionization
systems are employed to flood the atmosphere with positive and negative ions.
When ionized air comes in contact with a charged surface, the charged surface
attracts ions of the opposite polarity, thus neutralizing charged surfaces.
Polarize Film
Replacement
| 15.1"
or Smaller LCD Monitor/TV |
$95 |
Parts
and Labor are included* |
| 17"
to 17.4" LCD Monitor/TV |
$105 |
Parts
and Labor are included* |
| 17.5"
to 18.1" LCD Monitor/TV |
$125 |
Parts
and Labor are included* |
| 19"
LCD Monitor/TV |
$145 |
Parts
and Labor are included* |
| 20.1"
LCD Monitor/TV |
$165 |
Parts
and Labor are included* |
| 22"
Wide Screen LCD Monitor/TV |
$199 |
Parts
and Labor are included* |
| 23"
to 24" LCD Monitor/TV |
$269 |
Parts
and Labor are included* |
| 32"
LCD Monitor/TV |
$Call |
Parts
and Labor are included* |